ChartCement

SYSTEM	SURFACE PREP.	1st COAT	APPLICATION	2 COAT/ APPLICATION	3rD COAT/ FINISH	4th COAT/ FINISH	5th COAT/ FINISH	6TH COAT/ FINISH	7TH COAT/ FINISH	WARRANTY (YRS)
Painted Polymer Render	Ensure surface is clean & dry as per relevant primer’s data sheet	Armawall Sealer/ Bonder thinned with 30% GTA007 thinner or Dulux Luxaprime UMP unthinned	Brush, roller or airless spray to film thickness specified in relevant data sheet	Texprime v14 Roller or brush	Polymer Render WG or Polymer Render High Build WG Float finish	(If necessary) Polymer Render WG or Polymer Render High Build WG Float or sponge finish	Armour Roller or Airless spray	Armour Roller or Airless spray	-	10
Polymer Render, Trowel-on, Armour	Ensure surface is clean & dry as per relevant primer’s data sheet	Armawall Sealer/ Bonder thinned with 30% GTA007 thinner or Dulux Luxaprime UMP unthinned	Brush, roller or airless spray to film thickness specified in relevant data sheet	Texprime v14 Roller or brush	Polymer Render WG or Polymer Render High Build WG Float finish	Trowel-on (1-3 mm) Polystyrene float to swirl or travertine pattern	Armour Roller or Airless spray	Armour Roller or Airless spray	-	10
Poly Render, Finecote, Clearcote or Armour	Ensure surface is clean & dry as per relevant primer’s data sheet	Armawall Sealer/ Bonder thinned with 30% GTA007 thinner or Dulux Luxaprime UMP unthinned	Brush, roller or airless spray to film thickness specified in relevant data sheet	Texprime v14 Roller or brush	Polymer Render WG or Polymer Render High Build WG Float finish	(If necessary) Polymer Render WG or Polymer Render High Build WG Float finish	Finecote Float and sponge	Clearcote or Armour Rolled, sprayed or brushed as per relevant spec sheet	Clearcote or Armour Rolled, sprayed or brushed as per relevant spec sheet	10
Polymer Render, Sandcote, Clearcote or Armour	Ensure surface is clean & dry as per relevant primer’s data sheet	Armawall Sealer/ Bonder thinned with 30% GTA007 thinner or Dulux Luxaprime UMP unthinned	Brush, roller or airless spray to film thickness specified in relevant data sheet	Texprime v14 Roller or brush	Polymer Render WG or Polymer Render High Build WG Float finish	Sandcote Plastic float finish	Clearcote or Armour Rolled, sprayed or brushed as per relevant spec sheet	Clearcote or Armour Rolled, sprayed or brushed as per relevant spec sheet	-	10
Polymer Render, Santa Fe Render, Armour or Clearcote	Ensure surface is clean & dry as per relevant primer’s data sheet	Armawall Sealer/ Bonder thinned with 30% GTA007 thinner or Dulux Luxaprime UMP unthinned	Brush, roller or airless spray to film thickness specified in relevant data sheet	Texprime v14 Roller or brush	Polymer Render WG or Polymer Render High Build WG Float finish	Sante Fe Render Plastic float or sponge finish	Clearcote or Armour Rolled, sprayed or brushed as per relevant spec sheet	Clearcote or Armour Rolled, sprayed or brushed as per relevant spec sheet	-	10
IMPORTANT NOTES: USE THIS SYSTEM CHART IN CONJUNCTION WITH THE TECHNICAL SPECIFICATION SHEET RELATED TO THE PRODUCT MENTIONED, AND THE APPLICATION SPECIFICATION FOR PVC SUBSTRATES.. RESTRICTED WARRANTY. Although laboratory tests have indicated good adhesion of the non-Rockcote primers in this chart to the PVC substrate, the formulation and performance of these products is outside Rockcote’s control. Therefore the warranty does not cover the adhesion of the non-Rockcote primers to the PVC substrate, but is restricted to the adhesion of Rockcote products to the non-Rockcote primers listed and to each other. Warranty is valid only if product is applied by a skilled & experienced applicator and strictly in accordance with film-build and other specifications. Texprime must be Version 14 to ensure adherence to the Armawall Sealer/ Bonder. Other versions need to be checked for adherence by Rockcote Technical Dept. Drying times for Polymer Render & PR High Build on PVC will be considerably longer than for other substrates, particularly in cooler weather. That is why Winter Grade (WG) is specified. Whatever system is used, it is important to minimize moisture penetration into the Polymer Render & PR High Build by finishing the system with either two coats of product from the Armour family or, in some cases as shown above, two coats of Clearcote. This is not optional. The systems shown in this chart can level out uneven surfaces of up to 4 mm for Polymer Render, and up to 6 mm for PR High Build, plus the DFT of any additional textured coating used.

ROCKCOTE SYSTEM CHART – DINCEL Construction System