ChartPanels

ROCKCOTE SYSTEM CHART – OFF-FORM & TILT-UP PANELS

SYSTEM	SURFACE PREP. & PATCHING	1 ST COAT	2 ND COAT	FINISH	3 RD COAT	FINISH	4 TH COAT	G/TEE
Armour	All surfaces should be clean, dry & free from loose or crumbling material, oil or form release agents. If necessary water-blast and/or acid etch surfaces. Fill small holes with Smooth Sanding patch with cement added. Fill Larger imperfections with Skimcote or Q Render. (Steel trowel applied)	Solprime @ (solvent-based primer) – rolled, sprayed or brush applied	Armour	Roller or airless spray	Armour	Roller or airless spray		7.5
Armour Flex	As above	“ “	Armour Flex	Textured roller	Armour Flex	Long nap woolen roller		7.5
Spraytile	As above	“ “	Spraytile	Hopper gun or machine ‘off gun or tipped off’	Armour	Roller or airless spray	Armour (same as 3 rd)	7.5
Trowel-on & Armour	As above	“ “	Trowel-on (1-3mm) #	Travertine or swirl	Armour*	Roller or airless spray	Armour* (Same as 3 rd)	10
Toscani	As above	“ “	Toscani by 2 coats	Roller and water brush, in random cross hatch style				10
Render Paint Fine	As above	“ “	Render Paint Fine	Rolled & brushed	Render Paint Fine	Rolled and brushed		10
^Render and Paint (for off form concrete only- not applicable to Tilt Up Panels)	All surfaces should be clean, dry & free from loose or crumbling material, oil or form release agents . If necessary water-blast and/or acid etch surfaces. Fill imperfections with Skimcote or PM100 Render. (Steel trowel applied)	PM100 Key coat as per Technical Specification	PM100	Trowel and float and sponge	Rockcote Armour or any Rockcote Primer	Roller, spray or Brush	Any Rockcote Exterior Texture coating or Armour	NA
IMPORTANT NOTE: USE THIS SYSTEM CHART IN CONJUNCTION WITH THE TECHNICAL SPECIFICATION SHEET RELATED TO THE PRODUCTS MENTIONED * Warranty is valid only if product is applied by a skilled & experienced applicator and strictly in accordance with film-build and other specifications. * @ Solprime should be top-coated within 3-4 hrs of application. # May need Texprime over the Solprime for anti-slip properties if applying a textured coating. If applying Armour Clear or Clearcote as the top coats, then use Tex-prime or Hi-Opacity primer over the Solprime for uniform opacity. ^Rockcote does not recommend the use of cement based renders over high density concrete substrates. Rockcote recommends the use of Polymer Render in these areas May 2008