ROCKCOTE SYSTEM CHART – LIGHTWEIGHT SYSTEMS

System Chart for Grey Board, Green Board & Quik'n'Tuff

SYSTEM	SUBSTRATE	1 ST COAT	2 ND COAT	3 RD COAT	4 TH COAT	WARRANTY (Years)
Rockcote Reinforced Render Sandcote	EPS Grey board Green board Quik'n'Tuff	4-6mm PM100 reinforced with fibreglass mesh Finish: Steel Trowel or float	Primer Finish: Brush, spray or rolled	Sandcote Finish: Float	2 coats Clearcote Finish: Brush Roller or Spray	10

System Chart for Exin Board & Foamular Metric

SYSTEM	SUBSTRATE	1 ST COAT	2 ND COAT	3 RD COAT	4 TH COAT	WARRANTY (Years)
Rockcote Reinforced Render Sandcote	Exin – Tex Exin – Flex Foamular Metric	Step 1. 25% Acrybond Key Coat Step 2. 4-6mm PM100 Reinforced with fibreglass mesh Finish: Steel Trowel or float	Primer   Finish: Brush, spray or rolled	Sandcote   Finish: Float	2 coats Clearcote Finish: Brush Roller or Spray	10

All decorative systems referred to in the ‘Bricks and Blocks section' can also be applied over polystyrene. Follow all the preparation steps, then apply the decorative finish of your choice.

IMPORTANT NOTE: EXIN BOARD & FOAMULAR METRIC ARE TO BE KEY-COATED PRIOR TO REINFORCED RENDER APPLICATION. USE THIS SYSTEM IN CONJUNCTION WITH THE TECHNICAL SPECIFICATION SHEET RELATED TO THE PRODUCTS MENTIONED. *** Warranty is valid only if product is applied by a skilled & experienced applicator and strictly in accordance with film-build and other specifications. ***