How to tint ROCKCOTE Venetian Plaster using Antica Signoria tints

How to tint ROCKCOTE Venetian Plaster using Antica Signoria tints

Antica Signoria (AS) liquid tints are high quality, water based tints suitable for tinting ROCKCOTE Venetian Plaster.

Colour fast and alkali resistant, Antica Signoria tints offer total dispersion in the material, unlike powdered pigments, which are more likely to produce oxide bursts.

The tints can be added to ROCKCOTE Venetian Plaster using the below process anytime prior to use. Note that regardless of whether it has been tinted, the Venetian Plaster, should always been mixed immediately before application. See the product TDS for further details.

View the Antica Signoria Colour Range.

This guide is based on achieving the sought after colour for either a 4L or 15L pail of ROCKCOTE Venetian Plaster.

Equipment required

  • 20-25ml syringe (available from any chemist)
  • 4L or 15L pail of ROCKCOTE Venetian Plaster
  • 1 x mixing paddle
  • 1 x drill
  • Antica Signoria tint

Formulations

Contact Rockcote for the tint formulation document.

Refer to the Antica Signoria colour range for colour selection. Colour numbers located under the corresponding colour swatch.

Tint process

Step 1: Measure out the correct amount of tint using the syringe

Step 2: Add the tint to the Venetian Plaster

Step 3: Mix the product until the tint has blended completely through the Venetian Plaster

 

Related Products

Contact Us

Call 1300 736 668

Sunshine Coast
(Head Office)

18 Machinery Rd
Yandina QLD 4561

Mailing Address

PO Box 230
Yandina QLD 4561

Gold Coast

6 Indy Court
Nerang QLD 4211

Perth

Unit 4/13 Inverness Street
Malaga WA 6090

Website by the Various Artists