Quick Render Fine formulation update

Quick Render Fine formulation update

The ROCKCOTE Quick Render Fine formulation has been changed. This product is now made with a blend of Portland cement, which provides a much creamier and lighter feeling slurry when mixing.

The updated formulation of Quick Render Fine means that it is even easier to apply and has an earlier set time. Therefore, it can be floated sooner, which makes it quicker to use.

This new formulation is a slightly different shade of grey to the old formulation Quick Render Fine. If the new formulation is used on the same project as an old formulation Quick Render Fine, as it is a base coat render, will not result in a noticeable difference in finish colour when over coated with a primer and 2 coats of ROCKCOTE Armour.

Quick Render Fine is suitable for application over properly prepared substrates including brick, block, concrete, AAC panels or blocks, tilt-up panels and off-form concrete. For optimum results it should be applied at 4-8mm thickness per coat, and will take approximately 8 hours to dry and 48-72 hours to cure under normal drying conditions.

Refer to the Quick Render Fine TDS or contact ROCKCOTE on 1300 736 668 for more information.

Related Products

Contact Us

Call 1300 736 668

Sunshine Coast
(Head Office)

18 Machinery Rd
Yandina QLD 4561

Mailing Address

PO Box 230
Yandina QLD 4561

Gold Coast

6 Indy Court
Nerang QLD 4211

Perth

Unit 4/13 Inverness Street
Malaga WA 6090

Website by the Various Artists