Quick Render Grey

Quick Render Grey

Ideal base coat render for brick substrates

ROCKCOTE Quick Render Grey is an ideal base coat for a variety of substrates including brick, block, concrete and AAC panels. It is our recommended base coat for ROCKCOTE Render and Armour systems, and ROCKCOTE Coloured Render systems over brick.

Quick Render Grey is a pre-blended cement render manufactured to exacting specifications. It is composed of high quality washed and graded sand, general purpose grey Portland Cement and proprietary additives conforming to Australian Standard 3972.

ROCKCOTE Quick Render Grey has a longer pot life, and an increased working and finishing time during application. ROCKCOTE Quick Render Grey can also be "brought back" or reactivated during drying by lightly spraying with water. It is ideal for use in harsher drying conditions where a slower drying rate is required.

Properly cured Quick Render Grey exhibits minimal drying shrinkage and is a reliable surface for overcoating with ROCKCOTE acrylic textures and paints. 

Keep the finished ROCKCOTE Quick Render Grey sheltered from rain and moisture for 24 hours after completion dependent on climatic conditions.

  • An ideal render for trades who love working with grey cement
  • Has a slightly longer working time compared with off white cement renders
  • Excellent adhesion to properly prepared substrates
  • Tough
  • Long term exterior protection
  • Greater water repellency than site mix sand and cement
  • Can be overpainted after 48 hours (site mix sand and cement must be cured for 28 days prior to coating)
  • Saves time and money
  • Can reduce scaffold costs, when used instead of site mix sand and cement render
  • Ideal base coat for a variety of substrates including brick, block and other standard masonry substrates
  • Can be used interior and exterior
  • Ideal base coat for ROCKCOTE acrylic Coloured Renders, roll-on textures (such as Toscani and Render Paint) and Armour membrane paint and coatings
  • Quick Render Grey should be overcoated within 28 days of application
  • If the ROCKCOTE Quick Render Grey is to be applied less than 4mm thick per coat dry film build, 10% ROCKCOTE Acrybond must be added to the water
  • Suitable for pumping/spraying

Contact Us

Call 1300 736 668

Sunshine Coast
(Head Office)

18 Machinery Rd
Yandina QLD 4561

Mailing Address

PO Box 230
Yandina QLD 4561

Website by the Various Artists

Pardot tracking code