Quick Render PM100 High Build

Quick Render PM100 High Build

ROCKCOTE Quick Render PM100 High Build is a pre-blended light weight cement render manufactured to exacting specifications. This render is composed of high quality washed and graded sand, HE Off White Cement, shredded polystyrene and proprietary polymer additives, and conforms to Australian Standard 3972. The inclusion of quality acrylic polymers in the Quick Render PM100 High Build formulation aids adhesion and setting. 

Properly cured, ROCKCOTE Quick Render PM100 High Build exhibits minimal drying shrinkage and is a reliable surface for overcoating with acrylic and mineral textures. 

This product meets the needs of the professional tradesperson and the demands of modern construction materials and methods. ROCKCOTE Quick Render PM100 High Build is simple to mix and easy to apply and finish. ROCKCOTE Quick Render PM100 High Build has been formulated and designed to build out and level all masonry substrates. Also suitable as a base coat over polystyrene foam substrates (EPS and XPS).

Features: 
  • Easy to use
  • Excellent adhesion to properly prepared substrates
  • Acrybond not required, just add water
  • Manufactured with low density materials
  • Environmentally responsible (consists of approx. 50% post consumer waste)
  • Insulative properties
  • Fibre reinforced
  • Light in weight compared with standard renders
Benefits: 
  • Can be built up to 30mm thick in a single application (note that a 20mm to 30mm thick coat needs extra time to cure and dry out before texturing can commence)
  • Water repellent
  • Can overcoated after a minimum of 48 hours (site mix sand and cement must cure for a minimum of 28 days prior to coating)
  • Saves time and money
  • Can save scaffold costs when used instead of site mix sand and cement render
  • Increased insulation
  • Extra crack resistance
Uses: 
  • This product has been formulated and designed to build up and level undulating clay and cement block masonry and expanded polystyrene foam and can be built up to a thickness of between 5mm to 30mm in a single coat.
  • ROCKCOTE Quick Render PM100 High Build is ideal for a levelling base coat before the application of ROCKCOTE Coloured Renders and Textures.
  • Suitable for interior and exterior use, Quick Render PM100 High Build adheres well to standard and difficult masonry substrates such as bricks,concrete blocks, AAC panel, off-form concrete and specified lightweight building substrates when properly prepared. Please refer to the ROCKCOTE Systems Guide for all suitable substrates.
  • Ideal for restoration work and creation of classic architectural moulds including facades, keystones, parapets, eaves and features
  • Can be applied with a render pump

Contact Us

Call 1300 736 668

Sunshine Coast
(Head Office)

18 Machinery Rd
Yandina QLD 4561

Mailing Address

PO Box 230
Yandina QLD 4561

Gold Coast

6 Indy Court
Nerang QLD 4211

Perth

Unit 4/13 Inverness Street
Malaga WA 6090

Website by the Various Artists